Royal CBD's new world famous CBD gummies, hands down. See all their pure CBD products on their shop:

Category Archives: News

Home Posts Categorized as “News” (Page 3)

We are really really close!


We continue to work around the clock at Vantage to get you your Snaps and continue to battle new challenges. Our contract manufacturer (“CM”) has had one SMT line down (the tool that puts the components on the circuit board of your Snap), which has delayed the completion of some of our boards. Our CM tells us that all boards will be complete on May 30th at the latest, which pushes out the first shipments to June 9th. We are building up subassemblies as we wait for the final assembled circuit boards, so we can minimize lost time in our overall production schedule from this delay.

Our software team is making ongoing improvements on all of the details needed to make flying Snap an awesome experience. Here is some of our most recent progress:

  • We’re steadily improving the reliability of our video and control data stream and the speed of reconnect on signal drops. We’re currently adding a number of fancy tricks to combine data packets, measure and adapt to latency issues in real time, and eek every last drop of performance we can out of our data link.
  • We’ve added exponential control for both the app controls and the bluetooth two stick controller (we’re overdue on sharing more on both of these!). Exponential control makes it possible to have very fine grained control for subtle slow movements without limiting top end speed.
  • Gimbal pitch control wasn’t as smooth as we wanted. We changed design of the communication link to send rotation rates instead of target angles and added exponential control to the app interface so now Snap does buttery smooth gimbal pitch angle adjustments.
  • The Return To Home now varies behavior to match the circumstance, so Snap returns home slowly at lower altitude from close distances and more quickly at higher altitude when further away. We find this strikes a better balance of avoiding distant obstacles and keeping the experience mellow when Snap is close.
  • We’re working on improving the image sharpness in 1080p mode, which currently is not quite to spec.
  • Snap occasionally didn’t stay in place perfectly during both hand and ground takeoffs. We’ve found the bug and fixed it.

We’re keeping busy steadily improving every aspect of Snap as we wait for these final components to be assembled.

We know Snap has required way more patience than from all of you than you hoped (it has for us as well!). And we aren’t the only ones in the world offering flying cameras that take good video. Given that we’re asking you to wait just a bit longer, this seems like a good time to remind you what makes Snap special in the world:

  1. Safety: Imagine if your SLR camera said, “DANGER: DO NOT USE NEAR PEOPLE!” Think about how that would limit your photo albums. There is not a single high performance flying camera available today that can be used responsibly near people. This massively limits the range of places that you can fly your open bladed models, the type of shots you can get, and the amount that you will end up flying. Snap is the only high performance flying camera in the world designed to make you and everyone around feel at ease and safe.
  2. Ease of Use: We’ve designed Snap to be the easiest to use high performance flying camera in the world. Snap’s interface enables you to set up shots based on high level goals and let software do the work instead of relying primarily on complex two stick controllers (although you can do that with Snap too!). Snap has more options for tracking shots and easier interfaces for beautiful pre-planned shots than anything else available. These automated shots are only really possible with a safe flying camera, as letting software take control is massively irresponsible in most settings with drones that don’t consider safety.
  3. Extensibility: Snap is the only flying camera that allows you to extend capabilities over time. We are developing rotor sets specifically designed for amazing tracking shots, silent operation, 1-hour flight times, and a range of other super-powers that let you extend what you can do with your Snap.
  4. Portability: Our friends in China are giving us a good run for our money here, but Snap remains the only high performance flying camera that you can take and use anywhere. The ability to take Snap with us all the time and use it as inspiration strikes continues to change how we see the world and light our creative fire.

Of course, what excites us most, is seeing what you will do with these capabilities. And that is very very close for both you and us. If you are in the first batch of orders, you will be receiving an email from us this week to confirm your address and other important details. We’ll keep you in the loop as we work through these final steps.

Thank you as always for sticking with us through this journey.

– Tobin, Joe, and the rest of the team at Vantage


Quick Manufacturing Update


Vantage TeamWe’ve had a few more bumps in the road on the way to production. The primary issue has been the discovery of some critical corner case bugs with our Wi-Fi module. Thankfully, our vendor has been great in addressing them and after a few weeks of long nights, we believe we have the issue solved, although additional testing and tuning is needed to be certain.

Vantage continues to expand our Beta program as well as our rigorous internal testing, which has been tremendously valuable in continuing to uncover bugs and manufacturing quality issues.

Here are a few specific examples of details we’ve been working on:

  • If the phone’s location estimate jumps unexpectedly when flying on the edge of a phone-centered geo-fence, it can make Snap do some alarming rapid movements. We’ve fixed this.
  • Our sonar module is now working superbly we now are tuning mode and speed specific ground avoidance behavior to make sure Snap hit the right balance between avoiding obstacles and smooth video.
  • Deceleration behavior when going from max speed to zero was a bit too abrupt and can induce jarring video. We have tuned this for smoother ease in and out.
  • Even high end GPS modules like the one we use in Snap can occasionally have large position estimation jumps in certain circumstances, which can make Snap dart off unexpectedly. We have created logic to detect and handle this so you never need to know about it.
  • Our EIS (electronic image stabilization) does not currently perform as well as we think should. We’re working with our chip vendor to improve this.

Here’s one example of the latest code in action:

We are currently doing a build for 20% of our pre-orders, which is well underway, albeit a bit delayed due to continued delays for one last PCB. We currently expect to begin shipping from this build in mid-May, barring further delays or new bugs.

Thank you for your continued patience as we work to finalize Snap. We know these continued delays test the patience of the most loyal customers. We are working as hard as humanly possible to work through all of the issues and ensure that Snap is worth the wait.


Tobin, Joe, and the rest of the Vantage Team


March Manufacturing Update


Snap is not ready for production shipments yet, but we are getting extremely close. We have been steadily expanding our beta program and will continue to expand through the end of March.  We expect to ship production units starting in late April, barring new delays. We have had four primary recent delays: 1) We decided to replace the sonar module with a higher performance custom unit. 2) We continue to find new bugs with Beta units. 3) High-yield loss on a few parts has created inventory shortages. 4) Our volume PCB order is delayed. We will discuss each source of delay, as well as some more positive news in this update.

Sonar Module Upgrade

The sonar module is on the underside of Snap and is used for controlling altitude within sonar range and ground avoidance, which is especially useful in tracking and auto modes. As we expanded our testing, we found that our original sonar module didn’t work reliably over many terrain types and the range wasn’t sufficient to consistently avoid ground collisions, especially during fast tracking shots. The worst issue was that it occasionally gave erroneous data, which caused Snap to fly erratically. We had some ideas on how to make a better sonar module, but resisted making the change, as hardware changes always take longer than expected, and we know we’ve got more than one eager customer who doesn’t want to wait longer (not to mention, we had already, gulp, bought a whole lot of sonar modules). Ultimately, we decided that the performance as is was not acceptable and we took two long weeks to realize the sonar performance we knew was possible. This is now nearly complete and both ground avoidance and altitude hold are now working much better.

Beta Program

We have been steadily expanding our beta program and continue to feel so excited watching first time pilots harness the power of aerial photography with Snap.  Testers have graciously been pushing Snap to its limits and sending us valuable feedback.  Beta testers have praised Snap for being able to use it in so many places where other drones would not be welcome, its dynamic range and color profiles, the ease of the SmartTilt controls. We’ve also gotten a lot of feedback on bugs and ideas for improvement, which we’ve been acting upon.  Based on beta feedback, we’re working on improving the onboarding tutorial, creating a more constrained beginner mode, improving control over the gimbal pitch, and fixing a battery charging bug, in addition to a long list of other details. A few raw sample videos from our beta testers follow below. You can see many many more on our vimeo channel.

Inventory and Yield Loss

We’ve been working through the complexity of maintaining inventory on the 372 unique parts to make a Snap as we expand production. Yield and quality issues make this challenge more complicated and resulted in some delays, as we often have to scrap components that don’t meet quality standards or are damaged by production process errors. As a result, we have had shortages, and our overall production rates have often not been as high as we have targeted. Our team has been working through the root cause of all yield and quality issues to minimize this problem, as we have been ordering excess quantities for parts with known higher scrap rates. These issues happen for every product and never go away, so this shouldn’t be a surprise. However, Snap does continue to surprise us with the number of extremely challenging yield issues. As one example, GPS jamming reared its ugly head again unexpectedly when we switched the coating our our heat sink from a chromed zinc to an alodine coating. We switched to alodine as the coating is dimensionally slightly more accurate than the chromed zinc plating, which gave us a better fit between the heatsink and our plastic fuselage body. After doing this, we started seeing an increased number of units rejected due to not meeting our GPS accuracy quality standards. We ultimately had to pull apart all of the units made with the alodine coating, after discovering that this coating reduced the effectiveness of the grounding of our heat sink, which led to the heat sink acting as an antenna and jamming our GPS. We have subsequently switched back to the chromed zinc plating, but had to destroy more units than we like to think about to figure out the source of the problem and fix it.

Production Printed Circuit Board Delays

As we steadily ramp production, we have been transitioning to larger order quantities for our printed circuit boards (PCBs). We planned on longer lead times for these boards, but ran into a number of unexpected delays in a few last minute changes, questions from vendors, the final quotation process, and legal wrangling on contracts. Almost three weeks slipped away from us due to these banal issues. We hate it too.

Shipping Expectations

Last month, we said we targeted starting full scale production at the beginning of March and taking 6 weeks to fill all orders.  We are now in the beginning of March, but are still ramping production.  We continue to increase production rates and the number of units we ship each week. We will continue to call the units “beta” until we have fixed all known impactful bugs and are seeing our customers have consistently good experiences. Our expectation is that this will happen in late April. At our current pace, we expect to ship about 5% of our pre-orders in March, an additional 15% in April, and the balance May.

Feature Highlights – Tracking and Still Photo Samples

The tracking shots have quickly become our mode of choice for amazing videos. Tracking shots can be intimidating, as you are effectively letting software take over in the pilot seat, while you entirely divert your attention to your activity of choice.  We’ve found very few settings where we feel comfortable doing this with open bladed designs capable of causing injury if they unintentionally hit someone. Snap combination of safety, performance, and focus on ease of use make it an especially good platform for tracking shots.  Snap’s light weight, shrouded blades, and break apart design go a long way to give peace of mind as you give a microprocessor the keys (well, actually, seven microprocessors). Our software modes for tracking shots are intended to both give you more artistic control of your shots as well as help you understand how Snap will move with you, giving you more peace of mind.   Snap currently has three different tracking modes. In air tripod mode, Snap is constrained to a point, and yaws and pitches the camera to keep you in frame.

In virtual wire mode, Snap is constrained to a line you define in 3d space by pointing your phone. This shot is especially useful for creating interesting movement between the camera and subject as well as doing effective leading shots when your direction of motion is varied (like skiing down a halfpipe).

In free form tracking shots, Snap moves in lockstep with you in all directions with whatever initial offset you chose. This mode is especially effective for really big long tracking shots with large changes in altitude and big changes in direction.

We have a number of other tracking shots in development to expand on this range of options and continue to make Snap the best drone for tracking shots on the market.

In addition to being a great tool for video, Snap has also proved to be a mind stretching tool for photography.  Here are some recent samples of shots from Snap:




To close, we wanted to share our recently re-edited highlight reel, which includes both recent footage, as well as some of our favorite older shots. Hope you enjoy it!

Thanks again for your continued support and patience.  We know there are a million cool shots that you are missing out on while you wait for your Snap, and hate thinking about the lost opportunities.  Please know that we are pushing as hard as we can to get you flying, and won’t rest until all pre-orders are filled.

Best Wishes from the Vantage Team

Extreme Tech Challenge Recap


Hello, again, from Vantage HQ!  If you’ve been following our progress closely, you  know that we competed in the Extreme Tech Challenge.  Now that everything has wrapped up, we wanted to give you a recap, but first of all, we won!

Here’s the full story:

Last fall, Vantage Robotics, along with over 1300 other startups, entered the XTC competition.  XTC is a tech challenge that allows young companies to be recognized and attract investment from leading tech luminaries.  In November of 2016, the top twenty-five contestants were announced.  We made it to this round, and were further interviewed by a panel of XTC judges.

Of those twenty-five, Vantage was selected to be one of the top ten companies invited to come to CES in Las Vegas last month.  Our co-founders flew out and presented to another panel of judges (you can read up about this and watch the video on an earlier blogpost,  We qualified as one of the top three companies out of these ten.  We were invited to the final round, where we would present to a panel of industry leaders on Richard Branson’s private island in the Caribbean!  The list of judges included Sir Richard Branson himself, venture capitalist, founder and CEO of Breyer Capital, Jim Breyer, Veteran software entrepreneur and founder of C3 loT, Tom Siebel, Managing Partner of Aspect Ventures, Theresia Gouw, CTO for the Hillary for America campaign, Steph Hannon and COO of the iTutor Group Jerry Huang.

Last week Tobin and Joe made the trip to Necker Island, and presented with two other incredible companies, ReDeTec and Cresilon.  ReDeTec makes a device that recycles plastic to create 3d printing filaments, while Cresilon has created a gel that can stop massive bleeding in seconds.  You can watch the whole presentation, along with a shorter recap from all of the 10 qualifiers from CES here:   

After the presentations, the judges went away to deliberate.  The judges used the following criteria for their decision:

     -Is the company well timed for competing in a large and fast growing market?

     -Does the team have the track record and experience to achieve their goals?

     -Can this venture create an exceptional capital return for investors?

ReDeTec came in third place, leaving the top two remaining contestants neck and neck.  That is when the man himself, Sir Branson, took the mic.  Here is some of what he said about Vantage:

                           [The judges] felt there was a fantastic intensity around the Vantage team.  They thought is

                           was wonderful the way they [Vantage] have driven toward simplicity.  Obviously in my opinion

                           actually, I think the market is very large.  And I just love the product.  And the fact that it

                           won’t cut your head off is an advantage as well.

We must admit, hearing one of the most successful entrepreneurs in the world say, “I just love the product”, sent tingles down our spines!

In the end, we edged out Cresilon with a score of 202-200, to take home first prize!  After a short speech from Tobin, the whole party was surprised with a performance by Mix Master Mike of the Beastie Boys.  You can watch the award ceremony and Tobin’s speech here (sorry, no Mix Master Mike performance though).

So, what did we win? According to XTC, their mission is to “empower entrepreneurs and their companies with visibility, resources and a rolodex that together, bring a company more visibility, the ability to scale at low to no incremental cost, and to surround entrepreneurs with mentors that can help them build on product success with business success“.  We’ve already started to experience the power of connecting to this super hero squad of the business world. Richard Branson and Virgin have been a personal hero and role model for us and the opportunity to engage with him like this is a dream come true.  With the backing that comes from our XTC win, we have a suite of connections, and vetted validation to our name.  This helps immensely with fundraising, hiring, and partnerships, the key elements needed to continue to improve Snap and create an amazing experience for you.

We are deeply honored and excited to take home that flamingo trophy, and want to give a huge shout out to all the other contestants as well as a massive thank you to the whole Extreme Tech Challenge team.

After the event, Tobin and Joe didn’t have too much time to lounge around on the island (no kiteboarding for either of them this time).  We spent our last day in the Caribbean tuning the virtual wire and free form tracking modes from the best office location we think we’ll ever experience – a small beach outside of our hotel.   You can see all of them on our new vimeo channel, but here are some of the highlights.

We set this shot up using an upward angled virtual wire. The upward wire angle and crossing back and forth under the wire creates a bit of movement between camera and subject, which adds more visual variation than straight tracking shots. This was shot in 4k 30, raw footage from camera. There were fairly strong offshore winds, so water was flat, but Snap was getting hit hard by gusts. Thanks to gimbal, there’s no sign of the wind or Snap’s rapid attitude changes to maintain position.

This next video is shot in some seriously high wind – enough to kiteboard!  We still see a bit of yaw movement in these extreme wind conditions; we are making steady progress on this and expect it to continue to improve.

The rest of the team continues to power through getting Snap ready to ship.  We will be sending out a post later this week with updates on our manufacturing ramp and shipping timing.

As always, thank you for following our progress and all the great words of encouragement and feedback we hear from so many of you. This journey has taken us to more places than we ever expected, but the destination remains unwavering – creating the world’s best flying camera that you can take with you anywhere, use anytime, and see the world in an entirely new way. Thank you for being a part of this journey.

Until soon,

Tobin, Joe, and the rest of the Vantage team

End of January Update/FAQ


We’ve been making excellent progress towards getting Snap into your hands, despite some frustrating delays. As we get closer to shipping, we wanted to share our latest progress and answer some questions we’ve been hearing from you.  Let’s dive in:

Beta progress

Our Beta testing has been both positive and productive. We have been finding and fixing a healthy number of bugs, but haven’t had any issues requiring significant redesign. We’ve been getting valuable and constructive feedback as well, and incorporating it into our design wherever possible.  Most of the issues we’re dealing with have been software related, and the hardware related bugs have been on smaller components. 

Manufacturing status and shipping expectations

We cannot guarantee any precise shipping dates yet, but we target ending the beta test period and beginning production shipments on March 1st.  We think our chances of getting all our parts and hitting this goal is about 70%, and have no reason to expect any major delay.  From there, we expect that it will then take approximately six weeks to manufacture all pre-sale orders.  

We understand we have moved this date back enough times to stretch everyone’s patience. We’re not happy about it either. Delays from our manufacturer in shipping PCBAs we needed for FCC approval and beta scale-up were the primary cause of the most recent delays. However, the responsibility for maintaining the schedule is ultimately ours and we accept full responsibility.

We have subsequently received the delayed boards, passed FCC testing and resumed beta expansion. We will be scaling up beta over the course of the next month, so if you are an early backer and live in the US, look for an email from us as we expand the beta test.

We’ve made substantial progress building up our assembly line and training staff to scale-up production.  Check out this glue robot we created for building rotor sets below.  We are getting final parts delivered every day and our inventory is filling up.  We are not, however, entirely out of the woods.  Snap is made out of 450+ parts, and every single one is required before we can ship.  Until we have all of them in our hands, we are dependent on timetables that are not entirely in our control. 

Firmware and software status

We are finding and fixing bugs every day, and improving on all existing features.  Android is coming along well and will be ready to fly by the time we ship, although the full feature set may lag iOS just slightly.  Our autonomous flight and tracking modes are looking top notch.  Here is a recent video from a test flight testing our newest feature, free-form tracking with elevation changes.

How about some recent footage?

While we still want to post awesome footage that showcases Snap onto our youtube channel, that takes a lot of time and energy away from development, hence the lack of recent posts.  So we decided to make our private Vimeo channel public.  The videos on this channel have bugs, are unedited, and are sometimes a bit boring (unless you are excited to see Joe’s backyard), but this is the easiest way for everyone to keep up on our progress with full transparency.  We publish new videos just about everyday, and have also released old videos showing early prototypes (and much younger looking founders!). Check it out,

When do you expect to ship out the first wave of accessories?

We are focused on filling pre-sale orders.  We expect to complete our speed rotor set and range extender quickly after pre-order units have shipped.  If you want a glimpse into the future, these prototype rotors are designed to fly much faster and in high wind conditions.  Additionally, the prototype in the picture flies for 32 minutes and is over four times quieter than a Mavic according to our acoustic testing (67 dBA vs 74 dBA).

Necker Island

Tobin and Joe are heading out to Necker Island today, and will be presenting to a panel of judges, which includes Sir Richard Branson himself, tomorrow (Thursday)!  If you are interested in watching the event, there is an XTC Facebook event that will have a live feed,  The rest of the team will be hanging back and charging along in the office getting your Snaps ready (the team vacation will have to wait until next year).

 Do you have a user manual? Can I see the app before I get Snap? How does the app work?

We are still developing the app, and will not publish it until we are close to shipping.  The app contains tutorials, videos, and a full manual to help you get comfortable flying.  We will publish the tutorial videos before releasing the app, but not for a few more weeks.  Until then, here are a couple quick peeks of our iOS app.  Note that this is subject to small changes (like adding the free-form tracking to the list of automated features).

What features will or will not be ready at launch?

Manual control with the SmartTilt, all of our automated flights (Orbit and Out and Back) and tracking features (air tripod, virtual wire, and free form tracking), return-to-home, smart battery, and geofence functionality are all working very well right now and we expect them to be ready for launch.

There are a few areas that require additional work and may not be 100% complete at launch. The video streaming latency is excellent, but reliability and range still need software improvements. Tracking is GPS only, as our computer vision software isn’t ready. The DSM module will not be ready at launch. These issues are high priorities, and we plan to focus on getting them up as quickly as possible.

Will we be able to order extra parts and batteries before shipping still?

Our current payment partner is great with pre-order sales, but does not support shopping baskets for extra parts.  We need to relaunch our website with a new payment partner in order to do this.  This has been a lower priority and may not be ready when we start shipping, but we expect to launch soon after.  We will make sure to announce as soon as the new website is online!

When will the pre-sale end? 

Soon. We will make sure to announce a few days before it ends so that all of the last-minute shoppers will be able to squeeze in an order.

We’ve been touched by the outpouring of support from our community, and are incredibly grateful for your patience while we finalize everything over here.  We also love getting feedback from our community, so please feel comfortable letting us know if you have any questions, thoughts, or requests. 

— the Vantage Robotics team

We’re off to Necker Island!


Several weeks ago  Vantage attended CES with the Extreme Tech Challenge as one of the top-ten finalists, and, as the picture suggests, we finished in the top three out of 1300 applicants! Next stop is Necker Island in early February to pitch a panel of judges including Sir Richard Branson himself.

The Extreme Tech Challenge (XTC) is one of the largest startup competitions in the world, and CES is the stage for a round of live pitching. You can check out Tobin’s pitch below — it starts around the one-hour mark:

XTC’s video below will give you a better sense of what will happen on the island.  As co-creator Susi Mai mentions, it combines fun and business in a unique way— hard to beat a beautiful setting and the company of inspiring and smart people.

It was incredibly satisfying for us to receive this level of validation from such a well connected and experienced group of judges, especially given the impressive competition. But what matters most to us, above all else, is delivering a product to you that enables an out-of-this-world level of creative freedom and satisfaction. Building and improving upon a product with Snap’s level of complexity requires rare and amazing people, a worldwide network of technology suppliers, and of course, financial resources. The community we will be meeting with on Necker Island will help us continue to expand our capabilities on all of these fronts, so we can make sure to stay on the (figuratively only) bleeding edge of what’s possible and serve you for years to come. (And yes, the chance to go kitesurfing in the caribbean from a billionaire’s island is nice too. But then we’re back to work!)

In the meantime, the Vantage team continues to refine beta units, get more Snaps in the hands of beta testers, expand and improve our production line, and and work through a myriad list of logistical challenges. We’ll be sending out a more detailed update on delivery progress later this week, as we know all of you are eager to get your Snaps. The short story for those who can’t wait is that Snap is working well and scale up logistics are the primary hurdle between now and you getting your Snap.

Stay tuned for more updates and thanks for following our progress, as always!

— The Vantage team


Beta and shipping update


Greetings Vantage Community –

We wanted to update everyone on our progress towards getting Snap into your hands. Vantage has been manufacturing and shipping beta units since our last update, albeit less quickly than we would like. We will be continuing to expand our beta test and ramp up production over the course of at least the next 3 weeks before we will begin production shipments. We know many of you were hoping to get your Snap by Christmas and we’re sorry to make you wait.

Here’s a summary of some of the latest challenges we’ve been working through:

  • Camera firmware stability: There is an intermittent bug that causes our camera firmware to crash due to a kernel panic. This held up initial beta shipments. We now have a patch that addresses the primary issue, although it isn’t 100% solved.
  • Manufacturing yield: Scaling up production on a product this complex has been challenging. We are currently working
    through yield issues that have been delaying production ramp. Our extensive use of high performance adhesives and large number of complex PCBAs have been especially challenging. We are moving faster every day and expect to continue to accelerate here.
  • Fixing issues found by beta customers: Beta testing is exposing issues, especially around ease of use. We hate to make any of our customers feel anything less than brilliantly smart, so we’re working to dial in the experience to fix these issues.
  • FCC Approval: We had a few unintentional emissions that were slightly above allowable limits for FCC approval (this is quite common). This required a few additional electronics iterations to ensure that Snap is 100% legit.

And here’s some exciting progress:

  • Our Beta testers are happy!: While we certainly have more bugs to address, the basics are working well enough to satisfy our first users. Here’s a quote from one of our beta testers, “This thing is so f***ing cool that it’s making me almost giddy. Nice work.”
  • Hand launch experience: We’ve been continuing to refine the experience of launching Snap from your hand and it’s getting solid. We’ve got some exciting features we’ll be announcing soon that extend this functionality for a number of cool automated shots you can get without ever touching your phone.
  • PCBA IQC Functional Testers: We acknowledge these are more exciting to us than they may be to you. These testers do automated testing and flashing of our electronic circuits, which helps identify yield issues further up stream and has been massively accelerating our production rates, which we all can get excited about.
  • Over the air firmware update: Snap has 7 microprocessors, all running custom firmware, which makes updating code tricky. We just completed the functionality enabling this to be done from the app, making it way easier to keep the code up to date.
  • Android app progress: The Android app is coming together well and we expect it to be ready when we ship.

We know we’ve been pushing your patience in delivery here, but we’re getting really really close! There is nothing in the world like Snap and we know this extra effort we’ve had to put in will be worth it. While video capture and edit have not been our primary focus for the last month, a we’ve included a few recent videos below to whet your appetite.

From everyone at Vantage, we wish you a wonderful holidays and a great New Years.

Until soon,

Tobin and the Vantage Team

Beta Units Start Shipping This Week


Hello Vantage Community –

This is an exciting week for many reasons. As I’m sure few have missed, Tuesday is election day in the U.S. and it’s a big one.  While we have been largely heads down during this important time, focusing on getting Snap into your hands, all of this discussion of values during the election has been a good reminder for us to consider our own values and make sure you understand exactly what we stand for. This is also an significant week because we plan to ship our first beta units by Friday. We’re excited to share more on both topics in our latest update today.

Shipping Update

The team at Vantage continues to work with passion and intensity to get you your Snap and make sure it is right. We have been building beta units with our manufacturer and plan to ship our first ones at the end of this week. We will continue to ship beta units for the rest of November and plan to ship to our pre-order customers in December.

We have solved the issues we mentioned in our last update including the GPS jamming, tooling challenges, and a long list of software bugs. We have been flying and enjoying our internal test units for the last several months. We do continue to find bugs and have additional details we would like to refine, but we are really really close and incredibly excited. Our primary technical focus at this point is video streaming performance, video quality in the widest possible range of conditions, and making sure we nail ease of use (we hate products that make us feel dumb).

All of that being said, we have some updates we need to share. First, our Android app development is behind schedule and we do not expect to have our Android app ready until January 2017. We know this will be a disappointment for our customers with only Android phones and we sincerely apologize for the delay.

Second, we have decided take a slightly different approach regarding DSM support: we are going to offer a free DSM module to pre-order customers who want it and ordered before Nov 10, 2016. This will be an additional accessory that non-pre-order customers, and customers who order after Nov 10, 2016, will have to purchase.

Edit: When the DSM Module is released, we will reach out to all pre-order customers who placed orders prior to Nov 10, 2016. There is nothing to do prior to the release date.

Here’s our thinking: our most recent survey revealed that the vast majority of our customers don’t know what DSM is and/or don’t plan to use a DSM controller.  With our in-depth testing using a smartphone and game controller, we frankly don’t think a DSM controller will be useful to our customers in most situations. Furthermore, one key benefit of a DSM controller is increased range, however we found that the internal antenna for the integrated module had significantly less range than the external antenna on an add on module. This also helps us keep Snap affordable for future customers who don’t plan to use it with a DSM controller. Snap is already provisioned for this, and completing and shipping this add-on module will be a top priority after we have shipped Snap.

Stepping Back

While we are in the midst of working through every last little detail, we want to take a moment to step back and talk about the big picture, what keeps us working passionately, and why we believe Snap matters. The drone industry is still in its infancy and Snap is a completely different approach. While Snap is packed with an insane amount of cutting-edge technology, we don’t want you to love Snap for it’s amazing sensor fusion, advanced composites, or meticulous micro-gimbal. We want you to love Snap for what it lets you do, and we think Snap lets you do something amazing. It lets you capture moments that matter in an entirely new way, free from your limits of motion.

We’d like to share a bit about our perspective on what really matters in this highly-technical realm:

Your stories are personal. Forget about flying cameras for a moment. Think about the stories you most want to remember. The stories you most want to share. Your first kiss. Your first love. Asking the big question. Those first steps. Your shared adventures.  Now consider how many of those stories have people in them. This is why we made a flying camera designed for use around people. People are what make our stories matter, and Snap is the only flying camera truly made for capturing those stories.

The best camera is the one you have with you. And we want you to be able to take Snap anywhere. This meant leading the industry by scaling down on size, but not on performance. But it’s more than that. Using a quad with unprotected shrouds near people is like smoking at a kids birthday party. We don’t want to be the one making others uncomfortable, which previously often meant leaving existing drones on the ground. Snap’s safe design allow it to be your camera of choice anywhere — one that’s welcome in a crowd. This means you can take Snap to the places that matter.

Feeling smart feels good. So why does so much technology make us feel dumb? We hate this, too, so we designed Snap to make you feel capable. Snap’s design and interface has been considered, tested, and reconsidered with the goal of making great aerial video fun and easy. This means you can stay in the moment and focus on what matters.

Your dollars count. We know quality flying cameras, including Snap, are expensive. We’ve worked hard to keep Snap as affordable as possible, but our primary focus is creating a product that gives you your money’s worth through the length and richness of the relationship you can have with it. Nothing ends a relationship faster than a non-functional product, so we’ve designed Snap to survive those inevitable crashes and make repairs trivial when big accidents happen. We’ve also designed Snap to grow with you over time and stretch the value of your purchase. Snap’s alternative rotor sets and add-on modules will enable you to move faster, higher, further, and longer than any product in the world, so you can continue to expand your horizons.

– – – –

I had to give my Snap to our mobile developer this weekend and it’s absence felt notably significant. I have been infected with the pleasure of this new freedom of movement and perspective. When my son was throwing bread for ducks in a local duck pond, I struggled to find an angle with my iPhone that captured his expression without getting wet. And then when we saw a large parrot up in the trees near us (which is still a bit of a mystery, as I had never seen anything like it in San Francisco, including the famous parrots of Telegraph Hill), I again struggled to to find the angle to do it justice. The list went on from there. While I felt frustrated, it also make me feel even more excited to be able to share this pursuit with the world.

We close with a video I shot during a hike in Point Reyes with my family and one of my closest friend’s family. This reflects many of the values and goals we shared. And I don’t think there is another flying camera in the world that I could have used.

We will be in touch with updates on the Beta program and your specific delivery timing. Thank you as always for your patience, support, and ongoing belief in our adventure. We can’t wait to get Snap in your hands and see what you do with it.


Tobin and the rest of the Vantage team


PS – Don’t forget to vote!

End-Of-Summer Update



Phew! At Vantage HQ we can’t believe it’s already the middle of September! Between finalizing details with the manufacturer, continuing with tooling, and working to finalize our smartphone app, summer went by in a Snap!  With this, of course, we know our community has questions that they want answered.

In our last update, we let you know we were working on challenges with GPS jamming, a lagging key component vendor, and completing tooling. After several additional board iterations, we’re happy to let you know our GPS is now working spectacularly, although a few small issues remain at certain video streaming data rates. We expect the board spin we released for fabrication several weeks ago will address this final problem. The key component is in hand and on track for volume. However, the integration of the lagging component remains a risk area, as our test and debug timeline has been compressed.  We’ve addressed the short shot molding issue we mentioned with the fuselage, but we still face problems and delays with our tooler for other parts, and this continues to slow down our otherwise swift progress. The list of tooling issues is now considerably shorter, but we do still have a few remaining challenges before we are ready to ship. We are also working through remaining software details and bugs, which we are resolving quickly, but have not yet completed. Collectively, the remaining problems are well bounded and small, but so is the timeline for fixing them. We are optimistic about the time needed between Beta and production, but this is currently an unknown.

Our expectation is that we can begin sending Voluntary Beta units to our first pre-order customers on a rolling basis starting in 4-6 weeks. We plan to ship the bulk of pre-orders in November and December. We will begin reaching out to the first 5% of customers in approximately two weeks to confirm participation in the Voluntary Beta program.

We know many have been waiting patiently and don’t want to wait more. We’ve been very grateful for your supportive emails and positive comments on Facebook and the blog pushing us to get the product right. Every single member of the talented team at Vantage has been pouring their heart and soul into making this happen. We’re as eager as you are to see this baby ship and realize the potential of a product that makes it truly easy to capture spectacular aerial video.

Speaking of our team, we wanted to let you know we’ve recently added two highly-qualified members and they’re already hitting the ground running. Ramnik Khangura joins as our VP of Operations, and Aaron Crayford joins as our VP of Mobile Software. Note that we’ve had folks working in both capacities for a long time; these two roles are for accelerating these areas, not beginning work.

Ramnik brings deep knowledge of production processes, vendor relationships, and the ability to scale complicated products to high volume. He most recently was the VP of Operations at Navdy and previously a Global Supply Manager at Apple where he was responsible for operations on the launch of both the Apple Macbook Pro and Watch.

In addition to sharing the team’s passion for actions sports, Aaron is a world expert in video streaming and an accomplished mobile developer. He has shipped 15 advanced software products including Vusion, an HD video streaming company he founded whose software has been used by millions of customers, and Aloha, a mobile app that reached over a million users in a few weeks.  


Snap has become part of our daily lives away from work over the last several months. Being able to have it with us, use it at parties and around our families, and capture special moments in this new way has been such a gratifying lens for viewing the world. The combination of portability and safety, coupled with the ability to fly it with your smartphone, really makes Snap shine in these moments. We’ll be sharing more of these personal experiences over the next few weeks.  Here is one edit from a few weeks ago, shot on Squam Lake in New Hampshire. Check it out:

And because we know many of you are more interested in unedited versions, you can check that out below:

We can’t wait to make Snap part of your daily experience as well in the months to come. We know this has required some patience; we’re working tirelessly to make sure it’s worth the wait.

In our next post, we’ll dive into the interface design for our smartphone app, so stay tuned.

As always, thanks for your ongoing support! Don’t hesitate to leave your questions in the comments.

— Tobin, Joe and the Vantage Robotics team